ATI Technologies FIRE GL1 User's Guide download pdf (Page 38)

Screen image defects appear

Check if your monitor supports the resolution, horizontal (kHz) and

vertical (Hz) refresh rates as required by the graphics card.

Check for your current resolution, refresh rate, and color depth

settings in the

Settings

and

Monitor

dialogs of the

Display

Properties

Warning!

Be sure that both video card and monitor

support resolution and refresh rates you select. Incompatible

resolution/refresh rate selection may result in monitor

damage. Refer to your monitor's documentation for

recommended resolutions and refresh rates.

Screen image is off-center, color balance is wrong, or

there is no picture

♦

Try adjusting the brightness, sharpness, contrast, and color

balance controls of your monitor.

♦

Try adjusting the centering and positioning controls of your

monitor to position the picture on the screen.

Note:

The

Monitor Tuning

settings in

Display Properties

Adjustment

tune the position of the picture on the screen via

the video signal.

♦

Set the monitor’s RGB inputs (and sync switches, if this option is

available) to 75 Ohms, with the sync set to external.

Operating system warns that the video card is not

configured properly

♦

Check the driver installation and make sure that all software is

correctly loaded corresponding to your operating system and

applications. For more information, please see

Installing

Software

♦

Set Windows NT back to ‘Standard VGA’ and re-install the Fire

GL1 drivers.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 58 59

Comments to this Manuals

No comments

ATI Technologies FIRE GL1 User's Guide Page 38

Comments to this Manuals

Related products and manuals for Graphics cards ATI Technologies FIRE GL1