ATI Technologies FIRE GL1 User's Guide download pdf (Page 18)

Additional Instructions

♦

Switch on your monitor before you switch on your computer.

Failing to do so could damage your monitor.

♦

Note that your monitor is running in standard modes and that

higher refresh rates etc. are not available at this stage of the

installation! After you have successfully installed the Fire GL1

drivers, use the dialogs in the

Display Properties

menu allow

to adjust the video settings.

♦

The board has been designed to take advantage of 'plug–n-

play' without requiring additional installation or configuration.

Please refer to the Troubleshooting section for more information,

if it appears that the card is not performing optimally.

Monitor Compatibility

This graphics solution offers high-performance resolutions, refresh

rates and color depths. It is optimally configured to be combined

with high-resolution MultiSync or multi-frequency monitors. You

can also connect the Fire GL1 to other VGA monitors.

Note:

You can use the full power of the graphics card only if your

monitor supports the horizontal (kHz) and vertical (Hz) refresh

rates as required by the graphics card.

Warning!

Be sure the refresh rates you select are compatible with

your monitor. Incompatible refresh rate selection may damage

your monitor. Refer to your monitor's documentation for

recommended refresh rates.

If you can switch the impedance values on your monitor, use the

following recommended settings:

R, G, B video input: 75 Ohm

Synch: 2.2 kOhm

Try other 'Synch' settings if you cannot achieve a stable video

image.

If the impedance setting options are 'High' and 'Low' only, try the

setting that provides the most satisfactory monitor display.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 58 59

No comments

ATI Technologies FIRE GL1 User's Guide Page 18