ATI Technologies AT602 User Manual download pdf (Page 11)

Power Amplifier

Specifications

Model or Series AT3000 AT2000 AT1800 AT1202 AT602 AT6012

Number of Channels 2 to 7 2 to 7 2 to 7 2 2 12

EIA 1kHz Output Power at 8 Ohms* 350 watts 250 watts 210 watts 140 watts 75 watts 75 watts

EIA 1kHz Output Power at 4 Ohms* 475 watts 375 watts 315 watts 220 watts 110 watts 120 watts

FTC Full Bandwidth Output Power at 8 Ohms** 300 watts 200 watts 180 watts 120 watts 60 watts 60 watts

FTC Full Bandwidth Output Power at 4 Ohms** 450 watts 300 watts 270 watts 180 watts 90 watts 90 watts

Input Sensitivity for Full Rated Power 1.8 Volts 1.6 Volts 1.6 Volts 1.3 Volts 0.9 Volts 1.2 Volts

Frequency Response ±0.1dB from 20Hz to 20kHz at 1 watt

Phase Response +5 to -15 degrees from 20Hz to 20kHz at 1 watt

Signal-to-Noise Ratio “A-Weighted” Greater than 120dB below rated FTC full bandwidth power

Total Harmonic Distortion (THD) Less than 0.03% at full rated FTC power from 20Hz to 20kHz Less than 0.005% at full EIA power at 1kHz

Intermodulation Distortion (IMD) Less than 0.03% from 250 milliwatts to full rated FTC power

Load Impedance Safe with all types of loads. Rated for 4 to 16 ohms

Power Bandwidth FTC +0-3db from 5Hz to 100kHz

Damping Factor Greater than 400 from 10Hz to 400Hz

Crosstalk Greater than -100dB from 20Hz to 20kHz

Voltage Gain Through RCA Jacks 34dB 34dB 28dB 28dB 28dB 28dB

Voltage Gain Balanced Through XLR Jacks 28dB 28dB N/A N/A N/A N/A

Slew Rate 50V/microsecond

Input Impedance Nominally 28k ohms

DC Output Offset Less than ±5mV

Power Requirements 120 VAC (other voltages available on export models)

Chassis Dimensions (W x H x D) Inches 17 x 8.75 x 18.3 17 x 7 x 16.5 17 x 7 x 16.5 17 x 3.5 x 12 17 x 3.5 x 10.25 17 x 7 x 16

Chassis Dimensions (W x H x D) Millimeters 431.8 x 222.2 x 464.8 431.8 x 177.8 x 419.1 431.8 x 177.8 x 419.1 431.8 x 88.9 x 304.8 431.8 x 88.9 x 260.4 431.8 x 177.8 x 406.4

Net Weight (lbs/kg) Model Dependent 76-126/34.55-57.27 50-93/22.73-42.27 50-93/22.73-42.27 36/16.36 32/14.55 73/33.18

Shipping Weight (lbs/kg) Model Dependent 88-138/40-62.73 62-105/28.18-47.73 62-105/28.18-47.73 44 /20 48 /21.82 82/37.27

*EIA 1kHz Power refers to maximum average power in watts at 1kHz with 0.005% THD and noise. **FTC Full Bandwidth Power refers to maximum average power in watts from 20Hz to 20kHz with 0.03% THD and noise.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

ATI Technologies AT602 User Manual Page 11

Comments to this Manuals

Related products and manuals for Audio amplifiers ATI Technologies AT602